Cloud Functions


Particle.publishVitals, publishVitals

Since 1.2.0:


system_error_t Particle.publishVitals(system_tick_t period_s = particle::NOW)

Particle.publishVitals();  // Publish vitals immediately
Particle.publishVitals(particle::NOW);  // Publish vitals immediately
Particle.publishVitals(5);  // Publish vitals every 5 seconds, indefinitely
Particle.publishVitals(0);  // Publish immediately and cancel periodic publishing

Publish vitals information

Provides a mechanism to control the interval at which system diagnostic messages are sent to the cloud. Subsequently, this controls the granularity of detail on the fleet health metrics.


  • period_s The period (in seconds) at which vitals messages are to be sent to the cloud (default value: particle::NOW)

    • particle::NOW - A special value used to send vitals immediately
    • 0 - Publish a final message and disable periodic publishing
    • s - Publish an initial message and subsequent messages every s seconds thereafter


A system_error_t result code

  • system_error_t::SYSTEM_ERROR_NONE
  • system_error_t::SYSTEM_ERROR_IO


// EXAMPLE - Publish vitals intermittently

bool condition;

setup () {

loop () {
  ...  // Some logic that either will or will not set "condition"

  if ( condition ) {
    Particle.publishVitals();  // Publish vitals immmediately
// EXAMPLE - Publish vitals periodically, indefinitely

setup () {
  Particle.publishVitals(3600);  // Publish vitals each hour

loop () {
// EXAMPLE - Publish vitals each minute and cancel vitals after one hour

size_t start = millis();

setup () {
  Particle.publishVitals(60);  // Publish vitals each minute

loop () {
  // Cancel vitals after one hour
  if (3600000 < (millis() - start)) {
    Particle.publishVitals(0);  // Publish immediately and cancel periodic publishing

Since 1.5.0:

You can also specify a value using chrono literals, for example: Particle.publishVitals(1h) for 1 hour.

Sending device vitals does not consume Data Operations from your monthly or yearly quota. However, for cellular devices they do use cellular data, so unnecessary vitals transmission can lead to increased data usage, which could result in hitting the monthly data limit for your account.

NOTE: Diagnostic messages can be viewed in the Console. Select the device in question, and view the messages under the "EVENTS" tab.

Device vitals are sent:

  • On handshake (at most every three days, but can be more frequent if waking from some sleep modes)
  • Before an OTA firmware flash if last vitals were sent more than 5 minutes ago
  • Under user control from device firmware when using Particle.publishVitals()
  • From the cloud side (API or console) when requested

The actual device vitals are communicated to the cloud in a concise binary CoAP payload. The large JSON event you see in the event stream is a synthetic event. It looks like it's coming from the device but that format is not transmitted over the network connection.

It is not possible to disable the device vitals messages, however they do not count as a data operation.