|Author||Sandeep Mistry firstname.lastname@example.org, Nils Zottmann|
CAN bus for Particle using the MCP2515 This library is intended for the mesh boards which have no onboard CAN controller
Device OS Version:
This table is generated from an automated build. Success only indicates that the code compiled successfully.
This content is provided by the library maintainer and has not been validated or approved.
A Particle library for sending and receiving data using CAN bus with MCP2515. Based on https://github.com/sandeepmistry/arduino-CAN, with small changes to be compatible to Particle.
The library is only tested with the mesh modules Argon, Boron and Xenon. Older generations have an on-chip CAN controller.
- Microchip MCP2515 based boards/shields
INT pins can be changed by using
INT pin is optional, it is only needed for receive callback mode. If
INT pin is used, it must be interrupt capable via
See examples folder.