|Maintainer||Seeed Studio firstname.lastname@example.org|
Arduino library to control Grove Barometer Sensor BMP085/BMP180. Arduino library to control Grove Barometer Sensor BMP085/BMP180.
Device OS Version:
This table is generated from an automated build. Success only indicates that the code compiled successfully.
This content is provided by the library maintainer and has not been validated or approved.
This Arduino librarry is for Grove - Barometer Sensor(BMP085) and Grove - Barometer Sensor(BMP180).
<img src=https://statics3.seeedstudio.com/images/product/groveBarometer%20Sensor.jpg width=300><img src=https://statics3.seeedstudio.com/product/groveBarometer%20Sensor_01.jpg width=300>
<img src=https://statics3.seeedstudio.com/images/product/Grove%20Barometer%20Sensor%20BMP180.jpg width=300><img src=https://statics3.seeedstudio.com/product/Grove%20Barometer%20Sensor%20BMP180_02.jpg width=300>
Grove - Barometer Sensor(BMP180)-p-1840.html)
The Grove-Barometer Sensor(BMP085) features a Bosch BMP085 high-accuracy chip to detect barometric pressure and temperature. It can widely measure pressure ranging from 300hPa to 1100hPa, AKA +9000m to -500m above sea level, with a super high accuracy of 0.03hPa(0.25m) in ultra-high resolution mode.
The Grove-Barometer Sensor(BMP180) uses the Bosch BMP180 high-precision, low-power digital barometer chip. It offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on piezo-resistive technology for high accuracy, ruggedness and long term stability.The chip only accepts 1.8V to 3.6V input voltage. However, with outer circuit added, this module becomes compatible with 3.3V and 5V.
Search and install
Or flow the steps below.
- Clone this repo or download as a zip;
- Unzip the zip file if you downloaded a zip file;
- Copy the directory "Grove_Barometer_Sensor" into Arduino's libraries directory;
- Open Arduino IDE, go to "File"->"Examples"->"Grove_Barometer_Sensor"
Assume that you connected the grove correctly.
Contributing to this software is warmly welcomed. You can do this basically by
forking, committing modifications and then pulling requests (follow the links above
for operating guide). Adding change log and your contact into file header is encouraged.
Thanks for your contribution.
Seeed is a hardware innovation platform for makers to grow inspirations into differentiating products. By working closely with technology providers of all scale, Seeed provides accessible technologies with quality, speed and supply chain knowledge. When prototypes are ready to iterate, Seeed helps productize 1 to 1,000 pcs using in-house engineering, supply chain management and agile manufacture forces. Seeed also team up with incubators, Chinese tech ecosystem, investors and distribution channels to portal Maker startups beyond.