|URL||the URL of the project, like https://github.com/AdmiralTriggerHappy/E131|
A Library to read E13.1 (sACN) data
Device OS Version:
This table is generated from an automated build. Success only indicates that the code compiled successfully.
This content is provided by the library maintainer and has not been validated or approved.
This library is to simplify the validation and handling of E1.31 sACN (DMX over Ethernet) traffic. It supports both Unicast and Multicast configurations and exposes the full E1.31 packet to the user. Currently, development is targeted for the The Photon from particle.io.
- Particle Photon
There is a stand alone version (E131.ino) in the repo currently which is fully fuctional but the library version is not currently working.
These are to initialize the network stack and should be in the
setup() function of your sketch.
void begin() Starts with with only 1 universe at number 1
void begin(uint16_t universes) specifies how many universes to monitor (Not currently finished)
These are non-blocking handlers to be used in the
loop() function of your sketch.
int parsePacket(): Checks and parses new packets, returns number of DMX Channels in packet as
byte *data: Pointer to DMX channel data from packet. Always valid if double-buffering is enabled (see notes above)
uint16_t universe: DMX Universe of last valid packet
e131_stats_t stats: E1.31 Statistics
- Based on code From: http://github.com/forkineye/E131