|Maintainer||Paul Stoffregen, Julien Vanier email@example.com|
|All Versions||2.0.0, 1.4.3, 1.4.2, 1.4.1|
Counts quadrature pulses from rotary & linear position encoders. Encoder counts pulses from quadrature encoded signals, which are commonly available from rotary knobs, motor or shaft sensors and other position sensors.
Device OS Version:
This table is generated from an automated build. Success only indicates that the code compiled successfully.
This content is provided by the library maintainer and has not been validated or approved.
Encoder counts pulses from quadrature encoded signals, which are commonly available from rotary knobs, motor or shaft sensors and other position sensors.
This port of Paul's encoder library uses interrupts on the Particle Photon, Electron and Core.
Carefully read the Interrupts section of the firmware docs before selecting which pins for the encoder signal. In particular, do not use D0 or A5 on the Photon as an encoder input.
Copyright (c) 2011,2013 PJRC.COM, LLC - Paul Stoffregen firstname.lastname@example.org
Modifications for the Particle platform, copyright (c) 2017 Julien Vanier email@example.com
Released under the MIT license