|Author||Richard Whitney firstname.lastname@example.org|
A port of the
serLCD library for the 16x2 LCD. Connect the LCD's RX to the Particle's TX, and print to Serial1
Device OS Version:
This table is generated from an automated build. Success only indicates that the code compiled successfully.
This content is provided by the library maintainer and has not been validated or approved.
This is a port of the wonderful library found here: http://playground.arduino.cc/Code/SerLCD
The documentation there will explain all the functions available, and I expect them all to work
EXCEPT when it says
lcd.print() If you're copying example code, you'll need to change those to
Serial1.print()... and that's it!
The wiring is simple- Provide appropriate power and ground (there are 5v and 3.3v varieties
of the LCD) and connect the LCD's
RX pin to the Core or Photon's
- Basic use - A very short example showing LCD clearing and printing
- Internet display - Using Spark.function() to send messages to the LCD