Adafruit_BME280_RK (community library)
Summary
| Name | Value |
|---|---|
| Name | Adafruit_BME280_RK |
| Version | 1.0.9 |
| Installs | 11519 |
| Author | Adafruit |
| Maintainer | Adafruit info@adafruit.com |
| URL | https://github.com/adafruit/Adafruit_BME280_Library |
| Download | .tar.gz |
| All Versions | 1.0.9, 1.0.8, 1.0.6, 1.0.5 |
Arduino library for BME280 sensors. Arduino library for BME280 humidity and pressure sensors. Port of 1.0.5 version by rickkas7.
Example Build Testing
Device OS Version:
This table is generated from an automated build. Success only indicates that the code compiled successfully.
Library Read Me
This content is provided by the library maintainer and has not been validated or approved.
Port of Adafruit BME Library
Version History
1.0.9
- Added support for other Wire interface (like Wire1 or Wire3) by passing it to the constructor.
This is a library for the Adafruit BME280 Humidity, Barometric Pressure + Temp sensor
Designed specifically to work with the Adafruit BME280 Breakout
- http://www.adafruit.com/products/2652
These sensors use I2C or SPI to communicate, up to 4 pins are required to interface
Use of this library also requires Adafruit_Sensor to be installed on your local system.
Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
Check out the links above for our tutorials and wiring diagrams
Written by Limor Fried/Ladyada for Adafruit Industries. BSD license, all text above must be included in any redistribution
To download. click the DOWNLOAD ZIP button, rename the uncompressed folder Adafruit_BME280. Check that the Adafruit_BME280 folder contains Adafruit_BME280.cpp and Adafruit_BME280.h
Place the Adafruit_BME280 library folder your arduinosketchfolder/libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE.
We also have a great tutorial on Arduino library installation at: http://learn.adafruit.com/adafruit-all-about-arduino-libraries-install-use
Compatibility
| MCU | Tested Works | Doesn't Work | Not Tested | Notes |
|---|---|---|---|---|
| Atmega328 @ 16MHz | X | |||
| Atmega328 @ 12MHz | X | |||
| Atmega32u4 @ 16MHz | X | Use SDA/SCL on pins D2 & D3 | ||
| Atmega32u4 @ 8MHz | X | Use SDA/SCL on pins D2 & D3 | ||
| ESP8266 | X | SDA/SCL default to pins 4 & 5 but any two pins can be assigned as SDA/SCL using Wire.begin(SDA,SCL) | ||
| Atmega2560 @ 16MHz | X | Use SDA/SCL on pins 20 & 21 | ||
| ATSAM3X8E | X | Use SDA/SCL on pins 20 & 21 | ||
| ATSAM21D | X | |||
| ATtiny85 @ 16MHz | X | |||
| ATtiny85 @ 8MHz | X | |||
| Intel Curie @ 32MHz | X | |||
| STM32F2 | X |
- ATmega328 @ 16MHz : Arduino UNO, Adafruit Pro Trinket 5V, Adafruit Metro 328, Adafruit Metro Mini
- ATmega328 @ 12MHz : Adafruit Pro Trinket 3V
- ATmega32u4 @ 16MHz : Arduino Leonardo, Arduino Micro, Arduino Yun, Teensy 2.0
- ATmega32u4 @ 8MHz : Adafruit Flora, Bluefruit Micro
- ESP8266 : Adafruit Huzzah
- ATmega2560 @ 16MHz : Arduino Mega
- ATSAM3X8E : Arduino Due
- ATSAM21D : Arduino Zero, M0 Pro
- ATtiny85 @ 16MHz : Adafruit Trinket 5V
- ATtiny85 @ 8MHz : Adafruit Gemma, Arduino Gemma, Adafruit Trinket 3V
Browse Library Files