|All Versions||1.2.3, 1.2.1, 1.2.0|
Library for Adafruit ILI9341 displays. Port of version 1.2.0 by rickkas7. Install this library in addition to the display library for your hardware. Ported from https://github.com/adafruit/Adafruit_ILI9341 version 1.2.0
Device OS Version:
This table is generated from an automated build. Success only indicates that the code compiled successfully.
This content is provided by the library maintainer and has not been validated or approved.
Port of Adafruit TFT FeatherWing - 2.4" 320x240 Touchscreen for Particle Argon/Boron/Xenon
The Adafruit TFT FeatherWing has a touch screen display on the front and a socket for any Feather on the back, including the Particle Argon, Boron, and Xenon. You can find technical information at Adafruit.
There aren't any wires necessary, but it does use the following pins:
- SPI (SCK, MISO, MOSI)
- SD (SD card CS) = D2
- RT (Touch screen CS) = D3
- TFT_CS (display) = D4
- D/C (display) = D5
This library is also uses:
There are two Adafruit examples:
If you are looking for the 3.5" TFT Featherwing, check out Adafruit_HX8357_RK instead.
This is a library for the Adafruit ILI9341 display products
This library works with the Adafruit 2.8" Touch Shield V2 (SPI)
Adafruit 2.4" TFT LCD with Touchscreen Breakout w/MicroSD Socket - ILI9341
2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket - ILI9341
2.2" 18-bit color TFT LCD display with microSD card breakout - ILI9340
TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers
Check out the links above for our tutorials and wiring diagrams. These displays use SPI to communicate, 4 or 5 pins are required to interface (RST is optional).
Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!
Written by Limor Fried/Ladyada for Adafruit Industries. MIT license, all text above must be included in any redistribution
To download. click the DOWNLOADS button in the top right corner, rename the uncompressed folder Adafruit_ILI9341. Check that the Adafruit_ILI9341 folder contains Adafruit_ILI9341.cpp and Adafruit_ILI9341.
Place the Adafruit_ILI9341 library folder your arduinosketchfolder/libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE
Also requires the Adafruit_GFX library for Arduino.
- Update Adafruit_GFX_RK to 1.5.8
- Modify examples to not rely on copy constructor which is not implemented in Adafruit_SPITFT
- Update Adafruit_GFX_RK to 1.5.6
- Added default SPI speed